Certa CT18VCIRCSWA, User Manual

Assembling and Removing the Saw Blade

Assembling Saw Blade

1. Remove battery pack from saw.
2. Retract the lower guard (9).
3. Slip the saw blade onto the inner blade washer.
4. Replace the outer blade washer.
5. Depress the spindle lock button, then replace the blade screw. Turn the 

blade screw counter-clockwise with the blade wrench.

Removing the Saw Blade

1. Remove the battery pack from the saw.
2. Depress the spindle lock button, then turn the blade screw clockwise to 

loosen with the blade wrench.

3. Remove the outer blade washer then the saw blade.

Adjusting the Cutting Depth

1. Remove the battery pack.
2. Hold the saw firmly and loosen the depth adjustment

knob (15), by turning it counter-clockwise.

3. Move the baseplate to obtain the desired depth of cut.
4. Tighten the depth adjustment knob securely by turning

is clockwise before operating the saw.

Adjusting the Bevel Cutting

1. Remove the battery pack.
2. Loosen the bevel adjustment knob (12) by turning it

counter-clockwise.

3. Adjust the bevel to set the cutting angle in the range of

0° to 50°, with the angle scale showing the current
angle set in degrees.

4. Tighten the bevel adjustment knob securely by turning clockwise.

9