Battery & Charger Technical Specifications
Battery Pack
18V 1300mAh Li-ion
Battery Pack
Charging Time
1 hour
Charger Adapter
Input: 100-240V 50-60Hz
Output: 21V 2A
Charging Battery Pack
Place battery pack and charger on flat non-flammable surfaces and away from
flammable materials when re-charging battery pack.
1. Remove the battery pack (6) from the handle, press the
battery release button (5) downwards to do so.
2. Check that your mains voltage is the same as that marked
on the rating plate of the battery.
3. Plug the mains plug of the charger (16) into the mains
socket outlet, turn on the power, the green LED will
illuminate.
4. Push the battery pack onto the battery charger. The
green LED extinguishes and the red LED will illuminate,
which indicates that the battery pack is being charged.
5. When the charging period is completed after approx 1
hour, the green LED will illuminate and the red LED will extinguish.
Circular Saw Operation
•
Always wear eye protection while operating this power tool.
•
Always remove battery pack before assembling and removing blade.
Failure to remove battery pack from saw could result in accidental
starting, causing possible serious personal injury.
•
A 5-3/8 inch blade is the maximum blade capacity of your saw. Never
use a blade that is too thick to allow outer blade washer to engage with
the flats on the spindle. Larger blades will come in contact with the
blade guard, while thicker blades will prevent blade screw from securing
blade on spindle. Either of these situations could result in a serious
accident.
Kogan.com accepts no liability for accidents caused through misuse or not
following the instructions supplied here. Usage of power tools carries the risk
of property damage, serious injury or even death.
8
Green
Red
Summary of Contents for CT18VCIRCSWA
Page 1: ......
