Assembling the Unit
Adjusting the control handle
•
Place the unit on its back
•
Release the clamp screw
•
Slide the control handle along the pleated hose to the most comfortable
position
•
Retighten the clamp screw
Tightening the harness straps
•
Pull the ends of the straps downwards to tighten the harness.
Loosening the harness straps
•
Lift the tabs of the two sliding adjusters.
•
Adjust the straps so that the back plate is held firmly
and comfortably against your back.
Fuelling
Your engine requires a mixture of petrol and engine oil. The quality of these
products and the mixed ratio has a decisive influence on the function and service
life of the engine.
WARNING
: Unsuitable fuel, lubricants or mixed ratios other than those
specified may result in serious damage to the engine, sealing rings, hoses or fuel
tank.
Mixing the fuel
Avoid direct skin contact with the petrol or inhaling the vapours Use a container
approved for storing fuel. Pour the oil into the container first, then add the petrol
and mix thoroughly.
Mix to a ratio of 40 (unleaded petrol) to 1 (engine oil).
6
Adjustment Screw
Adjuster
Summary of Contents for CT33CLFBLWA
Page 1: ......
