background image

 

 

 

 
 

 

 

This product is NOT suited for commercial use.

 

 

DANGER! METAL CONDUCTS ELECTRICITY! Do not let this ladder or any of its parts 
contact live electrical wires. 

 

Maximum load for this ladder is 150kg. The weight of user plus tools and materials 
should not exceed 150kg. 

 

Always ensure that the locking mechanisms with weight placed on them are in the 
locked position before applying weight to the ladder. All the mechanisms should be 
locked if using the ladder at full extension! 

 

The ladder must be used with regular distances between the steps. 

 

Do not use any attachments, components or accessories not sold or recommended by 
Kogan.com with this ladder. 

 

Inspect the ladder after delivery, before use to confirm condition and operation of all 
parts. 

 

Inspect all parts prior to each use. Do not use if any parts of the ladder are missing, 
damaged or worn in any way. For professional users, regular periodic inspections are 
required. 

 

Ensure that the ladder is suitable for the task. 

 

Do not attempt to modify this ladder in any way. Doing so may result in serious injury 
and will void the warranty. 

 

Never attempt to repair a damaged ladder. Always have a qualified repair person to 
repair the damaged ladder. 

 

Destroy ladder if exposed to excessive heat (such as in a house fire) or corrosive agents 
(like acids or alkalis). 

 

Always use a firm grip and face ladder wherever possible. 

 

Always set up the ladder on a surface that is level, stable and dry. Never place the 
ladder on a slippery surface or try to increase the height of the ladder by placing 
anything under the rubber feet. 

 

Always ensure both rubber feet are firmly supported before stepping on the ladder. 

WARNING:

 

To avoid serious injury or death, please read these instructions 

and observe all warning labels on the product before use. Retain this 
manual for future reference.

 

        SAFETY & WARNINGS 
 

Summary of Contents for CTLADTLF6MA

















Reviews: