Assembly
Do not insert the battery or the safety key before the mower has been
completely assembled.
Fastening the push bars
The push bar is already assembled and only needs to be unfolded to the desired
position. Firstly unfold the quick fold lever, then loosen the handle knob.
Expand the handle, making sure that the upper and lower handle match up.
Screw them tightly with the handle knob and swing nuts. The swing nuts should
be hand tightened only. Never use a spanner or other tool to tighten them.
Securing Cable by using Cable Clips
Secure the cable from the motor to the switch assembly by using four cable
clips – two is fixed on upper push bar, the others fixed on lower push bar.
Mounting the Grass Collection Bag
Note: Before mounting the bag, the mower MUST
be switched off.
Raise the safety flap as far as possible, then place
the collection bag on the two hooks under the
deck. Always fit the grass collection bag onto the
mower before connecting the power sources.
5
Summary of Contents for CTLWN4AMWRA
Page 1: ......
