9 |
P a g e
C200 BOX CONTENTS CHECKLIST
C200 Series UPS
USB A to B
Software CD
Power lead
Warranty Card
Telephone patch lead
Quick start guide
INSTALLATION
•
DO NOT
connect the UPS to a mains supply until installation is completed
•
Ventilation of the UPS is important for proper operation. Ensure the air vents on the front, side and rear of the
UPS are clear. Allow adequate space around the UPS. The airflow diagram is shown as below:
Installation considerations:
•
The final location of the UPS unit must be on a flat stable surface in a well-ventilated environment
•
DO
keep at least 200mm of free space behind the rear panel
•
If installing an additional unit, place it next to the first unit in its final location
•
DO
allow the UPS to reach ambient temperature before turning on
•
The UPS needs to be fully charged to achieve full autonomy
IF ANY OF THE ITEMS ARE MISSING FROM THE UPS BOX PLEASE NOTIFY YOUR SUPPLIER
DO NOT MAKE ANY UNLICENSED MODIFICATIONS TO THE UPS. THIS MAY INCUR DAMAGE AND AFFECT THE UPS
WARRANTY.
DO NOT FORGET TO REGISTER THE UPS WARRANTY
WWW.CERTAUPS.COM/SUPPORT/WARRANTY-REGISTRATION/
