33
4.
Select setting value: Press the Select button
to select the number of EBMs according to your UPS configuration. (up to a
maximum of 9)
5.
Confirm settings: Press and hold the Enter button
for one second, and the
UPS will then return to settings mode.
6.
Exit Settings mode: Press and hold the Enter button
for 3 seconds or the
Power button
for 0.5 second to exit settings mode.
4.5 Configuring Green Function
The Green Function enables the UPS to detect the level of load being
supported. If an insignificant level of load is detected the UPS will shutdown
automatically, but only if it’s currently operating from the batteries.
The green function is disabled by default but the user can configure the Green
Function through the display:
1.
Enter settings mode: Press the Enter
button for longer than 3 seconds to
enter settings mode.
2.
Select settings items: Press the Select button
to cycle through the settings
to select the setting item “GF”.
3.
Enter settings item: Press the Enter button
for longer than one second to
enter the settings item.
4.
Select setting value: Press the Select button
to select “001” to activate the
Green Function.