-19-
■
Figure 6.3 Bypass mode
6.4 No Output mode
The LCD display in no output mode is shown as figure 6.4. The information
about the mains power, the battery level, the UPS output and the load level
could be displayed. The “STbY” string indicates UPS working in the No
output mode.
■
Figure 6.4 No output mode
6.5 EPO (Emergency Power Off)
It is also called RPO (Remote Power Off). On LCD display, the word of “EPO”
will be presented in the position of output voltage.
It is a special status which the UPS will shut the output off and send out an
alarm. The UPS cannot be turned off by pressing “OFF” button on the panel,
only after resetting EPO status.