21
Table 5-2 Buzzer definition
UPS condition
Buzzer status
Fault active
Continuous
Warning active
Beep every second
Battery output
Beep every 4 seconds, if battery low, buzzer Beep every
second
Bypass output
Beep every 2 minutes
The UPS provides useful information about itself: load status, events,
measurements, identification, and settings through the front panel display.
After powering on, the LCD will display the logo for several seconds and then
enter to the default page which shows the UPS status summary. The display
automatically returns to the default UPS status summary screen when no
button has been pressed for 15 minutes.
On the UPS status summary screen it provides the following information:
Status summary, including mode and load
Alarm status, if any are present
Notes: alarm including fault and warning information
Battery and charger status, including battery voltage, charge level and
charger status
Running information including UPS operating mode and running time
Fig. 5-2 The default LCD display
Summary of Contents for C400R-010-B
Page 7: ...3 ...