43
5.3.2 Turning on the UPS without utility
1)
Check all the connections are correct.
2)
Press
button continuously for more than 100ms and the UPS will
power on. The fan begins to rotate and the LCD will show the logo.
Then LCD will show the default UPS status summary screen after the
UPS finishes the self-test.
3)
Press
button continuously for more than 1 second, and the
buzzer will beep for 1 second. The UPS will start to turn on.
4)
A few seconds later, the UPS goes to Battery mode. If the utility
power comes back, the UPS will transfer to Line mode without
interruption of the UPS output.
5.3.3 Turning off the UPS with utility
1)
To turn off the inverter of UPS press
button continuously for
more than 3 seconds and the buzzer will beep for 3 seconds. The
UPS will go into Bypass mode at once.
2)
When completing the above action, UPS output voltage is still
present. In order to cut off the UPS output, simply cut off the utility
power supply. A few seconds later, the LCD display shuts down and
no output voltage is available from the UPS output terminal.
5.3.4 Turning off the UPS without utility
1)
To power off the UPS press
button continuously for more than 3
second, and the buzzer will beep for 3 seconds. The UPS will cut the
output immediately.
2)
A few seconds later, the LCD shuts down and no voltage is available
from the UPS output.
Summary of Contents for PowerControl C500R-060-B UPS
Page 31: ...28 Figure 4 5 and ensure all breakers are open ...
Page 41: ...38 Figure 5 7 HE mode ...
Page 48: ...45 Figure 5 14 Main menu tree ...