3.1. AirID
The
menu is displayed in the main window and shows the smart card status.
AirID
Setting
Display
Meaning
Initialize
AirID initialized the smart card. This message appears only very shortly
Card OK
The smart card is inserted and it is recognized.
When AirID is paired with a device, the device name is displayed here.
Card
unreadable
The inserted smart card is not readable. Please ensure that the card is properly inserted, that the
smart card is not damaged and the smart card is supported
3.2. Connection
The
menu is the second setting when you navigate down. This is used to activate the Bluetooth connection or to terminate the connection.
Connection
Setting
Display
Meaning
Initializing
AirID initializes Bluetooth and activates the advertising mode. This
message appears only very shortly.
In the advertising mode, the AirID sends a
Bluetooth signal making it detectable by
devices. Requests must be checked and
confirmed.
ON/
waiting
AirID has activated Bluetooth and advertising mode and is waiting
for the connection to be established. When the control element is
pressed, Bluetooth and the advertising mode are disabled.
Bonding
AirID has successfully connected to a device. This message
appears only very shortly.
Connected
AirID is connected to a device.
Disconnec
ting
When the control element is pressed, the connection is terminated.
OFF
Bluetooth and the advertising mode are disabled. Pressing the
control element activates Bluetooth and the advertising mode.
3.3. Pairing Code
This item is only shown during the first connection setup with a device and is used to display the pairing code and pairing status.
Setting
Display
Meaning
Pairing
Code
This menu is only shown
the first time a connection
is established with a
device and is used to
display the connection
key.
