15
MAINTENANCE
Cleaning
Blade Maintenance
Always disconnect the mains power plug before engaging in any cleaning work.
Cleaning
• Remove this grass from under the deck with a soft brush.
• Using a soft brush remove grass clippings form all ventilation openings and the roller.
• Remove the cutting head to gain access to the fan and clean it with a soft brush.
• Wipe over the surface of your product with a dry cloth.
Always handle the plastic blades with care, sharp edges could cause injury. Use gloves.
Plastic blades will wear over time or may break if they hit a solid object. Always replace blades in
pairs when worn or broken.
Carry out the following steps to change the plastic blades:
Disconnect from the mains electricity supply
and wait until the cutting head (11) has
stopped rotating.
• Turn the mower over and rest it carefully on
its side.
• Push the plastic blade (13) towards the
centre of cutting head (11). (Fig.11) Lift the
plastic blade away form cutting head.
• If a plastic blade (13) has broken during
operation remove both blades and replace
them immediately. Always replace blades in
pairs.
IMPORTANT!
Always wear work gloves when engaging in any maintenance work.
Never use water for cleaning your product. Do not clean with chemicals,
including petrol, or solvents as some can destroy critical plastic parts.
1
12
13
11
Fig. 11