Certina CHRONOGRAPH, Manual

NIGHT-MODE

®

FEATURE

TO USE NIGHT-MODE

®

FEATURE:

1. PUSH and HOLD Crown to “D” position for 4 sec-

onds to activate NIGHT-MODE

®

feature 

(U.S. pat. 4,912,688). PRESSING any pusher will 

cause the INDIGLO

®

night-light to stay on for 3

seconds.

2. NIGHT-MODE

®

feature will last for 8 hours.

3. Or PUSH and HOLD Crown to “D” position for 4

seconds to deactivate Night-Mode

®

feature.

IF STOPWATCH HANDS DO NOT RETURN TO

“0 POSITION” WHEN THE STOPWATCH IS

RESET:

1) PULL crown out to “B” position
2) PRESS pushers “A” or “B” repeatedly to move

hands to “0” position

3) PUSH in crown to “A” position

35

ENGLISH

STANDARD CHRONOGRAPH 

MEASUREMENT:

1. PRESS pusher “A” to start timing.
2. PRESS pusher “A” to stop timing.
3. PRESS pusher “B” to reset.

SPLIT TIME MEASUREMENT:

1. PRESS pusher “A” to start timing.
2. PRESS pusher “B” to split.
3. PRESS pusher “B” to resume timing.
4. PRESS pusher “A” to stop timing.
5. PRESS pusher “B” to reset.

INDIGLO

®

NIGHT-LIGHT

With the crown in the “A” position, PUSH crown to

the “D” position. Entire dial will be illuminated.

Patented (U.S. pat 4,527,096 and 4,775,964) electrolu-

minescent technology used in INDIGLO

®

night-light

illuminates entire watch face at night and in low light

conditions.

34

ENGLISH

W223_Analog2_NA_EN.qxd  6/5/09  9:19 AM  Page 34