2019 Cervis, Inc.
9
When you have the harness securely together, hang it around your neck
—or drape it over your
shoulder
—and begin operating your CB-xW.
2.4
Turn CB-xW Transmitter On
Turn the CB-xW transmitter on and make it ready for use as follows:
1. Turn the keyswitch 90
to the
ON
position.
Notes:
The standard Warrior CB-xW console box transmitter has a keyswitch on the
right-hand side. Typically, this keyswitch enables/disables transmitter power.
It is also possible to use the keyswitch to disable another feature (other than
power). Refer to the project documents for more information.
Some transmitter models do not have a keyswitch installed. If your transmitter
does not have a keyswitch, skip to step 2.
2. Pull the
STOP
button UP to the
ON
position.
