User Manual
U129.0.0
2
Figure 2 is the label that is permanently attached to the unit’s back side. This label describes
warnings and precautions that must be followed when using the transmitter.
Figure 2. Warrior Transmitter Warnings and Precautions
1.1 LED Indications
The ETHOS model has four LEDs that indicate transmitter status and are also used for
troubleshooting. Table 1 describes each LED.
Table 1. ETHOS model LEDs
LED Icon
Indication
Meaning
1
Radio
Frequency
(RF)
ON
Transmitter searching for receiver or a button is being
pressed
Flashing
Transmitting and receiving messages: communicating with a
receiver. If a lag is occurring, meaning the LED is blinking
and goes solid for short periods it may mean you have a
poor RF connection with the receiver.
2
Battery
OFF
Battery strength normal
Flashing
Battery LOW
ON
LOW Battery Shutdown in Process
3
Selection
OFF
A not selected: associated receiver relay OFF
On
A selected: associated receiver relay ON
4
Selection
OFF
B not selected: associated receiver relay OFF
ON
B selected: associated receiver relay ON
