Warrior MCB-9XL Transmitters
U106.3.0
ii
Cervis, Inc. Safety Precautions
Read and follow all instructions.
Failure to abide by Safety Precautions may result in equipment failure, loss of
authority to operate the equipment, and personal injury.
Use and maintain proper wiring. Follow equipment manufacturer instructions.
Improper, loose, and frayed wiring can cause system failure, equipment damage, and
intermittent operation.
Changes or modifications made to equipment not expressly approved by the
manufacturer will void the warranty.
Equipment owner/operators must abide by all applicable Federal, State, and Local
laws concerning equipment installation and operation. Failure to comply could result
in penalties and could void user authority to operate the equipment.
Make sure that the machinery and surrounding area is clear before operating. Do not
activate the transmitter control system until certain that it is safe to do so.
Turn off the mini console box transmitter and remove power from the machine unit
before attempting any maintenance. This will prevent accidental operation of the
controlled machinery.
Use a damp cloth to keep units clean. Remove mud, concrete, dirt, etc. after use to
prevent obstructing or clogging the buttons, levers, wiring, and switches.
Do not allow liquid to enter the mini console box or machine unit enclosures. Do not
use high-pressure equipment to clean the mini console box transmitter or machine
unit. Liquid will damage the interior circuitry.
Disconnect the radio machine unit before welding on the machine. Failure to
disconnect the machine unit may result in destruction of or damage to the machine
unit.
Operate and store units only within the specified operation and storage temperatures
defined in this document
’s specifications.
Keep high-energy radio frequency (RF) devices away from mini console box
transmitters. Activating high-power communication radios, for instance, in close
proximity to mini console box transmitters can cause
interference and “false” circuit
activation.
Do not key two-way radios while using the mini console box transmitter.
