U100.5.0
14
3.0
Warrior MU-X15 Handheld Remote (HH2S-9XW10)
The HH2S-9XW10 handheld is a small, compact handheld remote control that interfaces with
Warrior MU-9X15 receiver. The HH2S-9XW10 is made up of ten 2-step actuators. The HH2S-
9XW10 uses two AAA cell batteries for power. The handheld remote enclosure is constructed of
rugged polycarbonate designed to meet an ingress protection rating of IP55, according to IEC
60529. The HH2S-9XW10 has four LEDs used for diagnostics that indicate wireless link
(transmit/receive), Battery, and A/B selection.
Figure 9. HH2S-9XW10 and LED Descriptions
HH2S-9XW10 handheld remote button functions are configured by manipulating the MU-9X15
DIP Switch Mode settings. These configurations and the button functions are listed in Table 10.
Indicator LEDs (Red when active)
TX/RX
Transmit/Receive
A Selection
BATT
Battery Status
B Selection
Bridge Forward
Bridge Reverse
Trolley Reverse
Trolley Forward
Hoist Up
Hoist Down
A/B/AUX 1 or 2
nd
Hoist Up
AUX or 2
nd
Hoist Down
Stop
Horn/Start
