U100.5.0
4
1.2
Warrior MU-X15 HH2S-9XW10 Handheld Remote
A Warrior MU-X15 HH2S-9XW10 handheld has eight 2-stage buttons plus STOP and
HORN/START. The handheld is powered by two 1.5V AAA cell batteries. Once associated to a
receiver, the handheld stores
one
receiver ID in its memory. One or more handhelds are
associated with the receiver at Cervis, Inc. before it is shipped. Users use the Association
process described in Section 4.0 to change the ID in a handheld memory. See Section 4.4
(Factory Reset) to clear the handheld memory so that it will not control any receiver.
The Warrior MU-X15 HH2S-9XW10 has four LEDs that identify system status and provide
diagnostics. LEDs as shown in Figure 2 are:
Transmit/Receive
(TX/RX);
Battery Status
;
A
Selection
; and
B Selection
.
Figure 2. Warrior MU-X15 HH2S-9XW10 Handheld Remote
Warrior MU-X15 HH2S-9XW10 Handheld Remote Features
•
Powered by two 1.5V AAA cell batteries
•
Low Battery Warning and Low Battery Auto-Shutdown
•
900 MHz license free operation @ 100 mW
•
Rugged compact design
•
Protective rubber bumper and detachable wrist lanyard
•
Four Diagnostic LED indicators
•
Ten two-step actuators
•
Operating temperature:
–40°C to +60°C (–40°F to +140°F)
•
Storage temperature:
–40°C to +85°C (–40°F to +185°F)
