4
CVX‐10/CVX‐15 ‐ Rear Panel
The CVX‐10/CVX‐15 powered loudspeaker has an assortment of controls and connections that cover
several applications. It is suggested to review the rear panel, as listed below, to take full advantage
of the product features.
(A)
INPUT 1, INPUT 2, INPUT 3 GAIN KNOBS
Each GAIN knob adjusts the gain level on the respective input signal. The full clock‐wise position
(MAX) sets the gain level to maximum whereas a full counter‐clockwise (MIN) position sets the gain
level to the minimum/mute level.
(B)
INPUT 1, INPUT 2 MIC/LINE SWITCH
Set each switch according to the equipment connected to INPUT 1 and INPUT 2. For example, if a
microphone is connected to INPUT 1, set the switch to MIC. If a mixing console or acoustic‐electric
guitar is connected, then set the switch to LINE.
(C)
SIGNAL/CLI P INDICATOR
Each of the inputs has a LED for status on the incoming audio signal – green for good, red for clipping.
The indicator turns red when the audio signal is clipping and adjustments must be made to avoid
amplifier shutdown and poor sound quality.
(D)
INPUT 1 & INPUT 2 INPUT JACKS
A combination input on each channel allows for either XLR or ¼” TRS cable types.
(E)
INPUT 3 INPUT JACKS
A pair of ¼” TS unbalanced input jacks is provided on this channel for stereo connections such as a
keyboard or media device. Devices with RCA outputs can use these inputs with the appropriate
cable or plug adapter. Both input jacks on this channel are summed into one mono signal.
