SUBWOOFER CONNECTION
Wire the subwoofer terminal per the wiring diagram. Use minimum of 16 ga. wire
(14 gauge is preferable) between the enclosure terminal and the amplifier. When
wiring the subwoofer up to your system pay close attention to the polarity of the
terminals on the enclosure. Make certain they correspond to the polarity of the
subwoofer amplifier used
4
4
AMPLIFIER
250-500 W RMS
SUBWOOFER PLACEMENT
Placement is important as you need to develop “wavelength” to get the most bass output
from your NEW Cerwin Vega Mobile - loaded subwoofer enclosure. See drawing above.
NOTE: Make sure to secure the subwoofer enclosure as these woofers move a LOT of air and
the enclosure will bounce around under high output settings.
XE10SV / XE10DV
XE12SV / XE12DV
SUBWOOFER CONNECTIONS
ENCLOSURE
TERMINAL
INSIDE
ENCLOSURE
ENCLOSURE MOUNTING BRACKETS
(mounting hardware included)
