© Cesab
7 – 7
T Code(s): 841, 842, 843
Repair manual: Maintenance
Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040
Date: 2018-05-01
Applies from serial number: 6384351-
Truck area
Pos.
Measure
750h
/12m
Time
expenditure
1700 Drive
motor
a
Check the drive motor's attachment.
X
4:30 minutes
(excluding oil
change for drive
gear)
b
Clean the drive motor.
X
c
Inspect for abnormal noise in the drive
motor bearings.
X
2550 Drive
gear
d
Check for abnormal noise
X
d
Lubricate the steering bearing, lubricant
type G See section "11.5 Fitting
grease nipples, steering bearings
(Option)".
(X
1
)
1. Option! Does not need any lubrication when used normally. For trucks that are used intensively or in cold
storages, we recommend lubrication every 1500 hrs.
e
Inspect the steering bearing for correct
mounting and play.
X
f
Change the drive gear oil
X
2
2. Note: The oil in the drive gear only needs to be replaced after 750 hrs. For trucks that are used intensively
or in cold storages, we recommend replacing the oil more often.
3180 Brakes
g
Inspect the brake disc for wear.
Minimum brake disc thickness: 7.9mm,
X
h
Check the air gap in the released position.
0.4±0.3mm
Measuring must be done around the entire
pressure disc, both on the inside and the
outside.
X
i
Clean the brake.
X
https://www.forkliftpdfmanuals.com/