Make sure that the power cable runs into the cover
through the new opening (removed lug).
7. Install the door contact directly next to the motor
cylinder and the door. In doing so, follow the
instructions for the door contact.
8. Mount the magnet which belongs to the door contact
onto the door frame opposite the door contact.
9. Connect the connecting cable to the door contact.
If necessary, you can shorten the connecting cable,
but you cannot extend it. The door contact cable
must not exceed approx. 25cm. A cable which is too
long may lead to unintended behaviour.
10. In the configuration menu, activate the use of the
door contact (see
CESeasy motor cylinder
Page 45 of 53
14 Optional accessories