4. Push the wire ends into the connector, and carefully
tighten them.
Make sure to connect the cable correctly to the positive
and negative terminals as indicated in the connector of
the motor cylinder case.
+ next to the bottom side
- next to the button
5. Remove the lug in the cover of the battery compartment.
6. Run the power cable through the recess into the motor
cylinder (see picture).
7. Slide the cover back onto the battery compartment.
Make sure that the power cable runs into the cover
through the new opening (removed lug).
Now the external power supply unit is connected.
It is recommended to additionally insert batteries which
ensure that the motor cylinder can also be used in the
event of a power outage.
CESeasy motor cylinder
Page 47 of 53
14 Optional accessories