5.3 Disassembly of the mechanical cylinder
Tools required
Tool
e.g. by
MC2 torque wrench
Proxxon Industrial MicroClick
2.0x50 Allen key
Wera 840/4 Z (05059603001)
TORX Bit TX10x25
Wera-TORX-Bit, 867/1 Z (05066485001)
Disassembly
1. Remove any possibly existing batteries from the
motor cylinder (see
2. Loosen and remove the four TORX screws which
attach the assembly plate to the case.
3. Remove the cylinder with the assembly plate from
the case of the motor unit.
CESeasy motor cylinder
Page 15 of 53
5 Mechanical cylinder for the motor cylinder