3 For your safety
3.1 EU Declaration of conformity
You can find the EU Declaration of conformity on the Internet at
www.ces.eu
.
3.2 Intended use
CESeasy products are intended to control access at doors. They are exclusively intended for this
purpose and may only be used for this. They may never be altered in any way without written
permission from C.Ed. Schulte GmbH Zylinderschlossfabrik.
All other uses are regarded as improper use and may lead to material damage or even personal
injuries. C.Ed. Schulte GmbH Zylinderschlossfabrik assumes no liability for damage caused by
improper use.
3.3 Basic safety instructions
CESeasy products have been built with state-of-the-art technology and established safety
regulations. Nevertheless, their use may constitute function-related hazards for the user or third
parties and may impair the handle set and other material assets.
Please observe all warnings and notices in this manual while assembling, configuring and using
CESeasy products.
3.3.1 Life-threatening danger
l
CESeasy products have not been developed, tested and/or approved for access in
life-threatening situations. Do not use CESeasy products on fire doors or panic doors.
l
CESeasy products must be suitable for your door system. If you are in doubt, please contact
the manufacturer of the door or lock to check suitability.
l
All components which are required for a complete installation at your door must be CE-
compliant. Please check before installation whether all components used are CE-compliant.
3.3.2 Danger of personal injury
Danger of explosion
l
Live parts may cause explosion. Do not use parts in potentially explosive areas.
Page 6 of 53
CESeasy motor cylinder
3 For your safety
