ReCon T Energy Logger
User manual
Important safety information
Warning. To avoid electrical shock or fire:
1. Re view the entire manual before using the ReCon T Energy Logger and its accessories and observe
all warning s and cautions.
2. Do not use exposed metal BNC or b an an a plug connectors.
3. Do not insert any metal object into the connectors.
4. Do not work alone ever.
5. Avoid connecting the instrument to live voltage. If disconnecting the voltage during the installation is
not possible, extreme caution. In any circumstance, always wear protective gloves, face shield, boots,
helmet and any other required individual protection equipment.
6. Do not operate the ReCon T Energy Logger in explosive hazardous areas.
7. Use only insulated current probe s, test leads, and adapters as supplied with the ReConT Energy
Logger.
8. Before use, inspect the ReConT Energy Logger, voltage probes, current probes, leads, and
accessories for mechanical damage, and replace when damaged. Look for cracks or missing plastic.
Pay special attention to the insulation surrounding the connectors.
9. Remove all probes, test leads, and accessories that are not being us ed.
10. Do not apply input voltages above the rating of the ReConT Energy Logger as shown on the input
panel.
11. Do not apply voltages in excess of the marked ratings of the voltage and current probes.
6/39
