ReCon T Energy Logger
User manual
Recording mode
New instruments (firmware version V2.60 and newer) allow three different modes of recording data.
GPRS instruments do not allow Programmed or Triggered recording modes.
Continuous recording
This is the classic recording mode. The instrument starts recording data when the user clicks “Apply
and start recording” and stops recording when “Erase recorded data” is clicked. The instrument measures
and records data even during downloading of data, setting up of the instrument (unless setup changes force
an erasure of recording data due to incompatible new setup with regard to recorded data) or real time
measuring and displaying. Some instruments provide a push button to start/stop the measurement recording
(user must press button for, at least, 3 s and the release).
15/39
Figure 7: Continuous recording