CESSNA
SECTION 6
MODEL 172RG
WEIGHT & BALANCE/
EQUIPMENT LIST
EQUIPMENT LIST
The following equipment list is a comprehensive list of all Cessna equipment
available for this airplane. A separate equipment list of items installed in your
specific airplane is provided in your aircraft file. The following list and the specific
list for your airplane have a similar order of listing.
This equipment list provides the following information:
An
item number
gives the identification number for the item. Each number is
prefixed with a letter which identifies the
descriptive
grouping (exam-
ple:
A. Powerplant & Accessories) under which it is listed. Suffix letters
identify the equipment as a required item, a standard item or an optional
item. Suffix letters are as follows:
-R = required items of equipment for FAA certification
-S = standard equipment items
-
0= optional equipment items replacing required or standard
items
- A = optional equipment items which are in addition to
required or standard items
A reference drawing
column provides the drawing number for the item.
NOTE
If additional equipment is to be installed, it must be done in
accordance with the reference drawing, accessory kit instruc-
tions, or a separate FAA approval.
Columns showing
weight (in pounds)
and
arm (in inches)
provide the weight
and center of gravity location for the equipment.
NOTE
Unless otherwise indicated, true values (not net change
values) for the weight and arm are shown. Positive arms are
distances aft of the airplane datum; negative arms are distan-
ces forward of the datum.
NOTE
Asterisks (*) after the item weight and arm indicate complete
11
assembly installations. Some major components of the assem-
bly are listed on the lines immediately following. The summa-
tion of these major components does not necessarily equal the
complete assembly installation.
1 July 1979
6-15
