background image

1.2 Target groups of this manual

If a section of this manual is intended for a particular target group, this is stated at the start of the section. Sections that do not

specify a particular group are relevant for all target groups.

Target group

Skills

CEStronics partners

are trained experts in locking and security technology that have also worked with CES for many years and have a special level

of product knowledge.

Particular characteristics of the target group:

l

Detailed knowledge of CES products

l

Participate regularly in product training

Locking and

security technology

specialists

have many years of professional experience and/or relevant training in locking and security technology. For some tasks it may

be necessary for specialists to have received training on the product beforehand.

Particular characteristics of the target group:

l

Knowledge of specialist terminology from the field of locks and handles

l

Knowledge of specific risks when mounting electronic cylinders and handle sets, for example

l

Experience of working with tools (relevant to lock systems)

l

Knowledge of relevant standards and regulations, e.g. for fire safety or emergency and escape routes

l

Basic understanding of electronic locking systems

Electricians

have many years of professional experience and/or relevant training in electronics. For some tasks it may be necessary for

specialists to have received training on the product beforehand.

Particular characteristics of the target group:

l

Knowledge of specialist electrical terminology and its symbols

l

Knowledge of the risks associated with handling sensitive electronic components

Personnel with

product training

have received training on the product by CES or a CEStronics partner. Here the personnel are given detailed and specific

information to prepare them for the required task.

Particular characteristics of the target group:

l

Knowledge of CEStronics products and experience in handling them (assembly, operation, etc.)

IT/administration

specialists

have many years of professional experience in the fields of IT structures, administration and networks.

Particular characteristics of the target group:

l

Knowledge of specialist IT terminology

l

Knowledge of the structure and maintenance of networks, particularly knowledge of the network that they maintain

System operators

have experience in the management of master key systems. This can be either a number of systems or a detailed knowledge

of a single master key system.

Particular characteristics of the target group:

l

Knowledge of the specialist terminology related to master key systems

l

Skilled in the use of PCs and software

End users

do not require specific skills.

www.ces.eu

Subject

to

change

without

notice.

BRO

2327

VA1

Summary of Contents for AccessOne PHG Voxio Display



























Reviews: