Fitting
Page 42 of 128
OMEGA ACTIVE IES
16
Locking cylinder (not part of the scope of delivery)
17
Centring sleeve
18
Mortise lock (not part of the scope of delivery)
19
M6 fixing screw for handle
1.
Fig. 17 - Insert the spindle
Select the spindle
appropriate for the
follower (hub).
Insert the spindle
into the follower of
the coupling unit.
The correct spindle must already be specified with the
order.
2.
Fig. 18 - Fasten the spindle
Fasten the spindle
with the hexagon
socket head screw.
Use the 2 mm
hexagon socket head
key supplied for
fastening the spindle.
NOTICE
Malfunctions may occur if the hexagon socket head
screw is not inserted properly!
Always insert the hexagon socket head screw so that it
faces up.