Fitting
OMEGA ACTIVE IES Page 47 of 128
14.
Fig. 30 - Feed the connection
cable
Feed the connection
cables (2) through
the hole for the
upper fixing screw
(1).
Use the plastic pipe
as an aid if
necessary.
15.
Fig. 31 - Mount the outside
shield
Mount the outside
shield on the door.
NOTICE
Malfunctions may occur if the connection cable is
squeezed!
Be sure that the connection cables are guided
through the hole for the fixing screw without being
damaged.
Be sure that the connection cables are not squeezed
when you mount the outside shield.