Fitting
Page 48 of 128
OMEGA ACTIVE IES
16.
Fig. 32 - Feed the connection
cable
Feed the connection
cables (1, 2) through
the relief in the
inside plate.
Only plug it in after
the inside plate has
been secured (No.
22).
NOTICE
If the ESD cover (3) is removed, this may
cause malfunctions of and/or damage to the
IES.
Do not remove the ESD cover of the electronic
unit (3).
17.
Fig. 33 - Mount the inside plate
Slip the inside plate
on the spindle and
over the cylinder.
Properly align the
inside plate.