Fitting
OMEGA ACTIVE IES Page 61 of 128
21.
Fig. 62 - Guide the cable
Guide the cables (1)
below the holder of
the inside handle
upward to the plug
connector.
Be sure not to
damage or squeeze
the cables.
22.
Fig. 63 - Plug in the plug connector
Carefully plug in the
plug connector of
the 12-conductor
cable (1).
Carefully plug in the
plug connector of
the antenna (2).
Make sure that no
contacts are bent in
the process.
NOTICE
If the ESD cover (3) is removed, this may
cause malfunctions of and/or damage to the
IES.
Do not remove the ESD cover of the electronic
unit (3).
durch Entfernen der ESD-Abdeckung (3).
-Abdeckung der