Fitting
Page 68 of 128
OMEGA ACTIVE IES
8.
Fig. 77 - Lay the cables
Lay the cables along
the side of the
coupling as shown.
Satisfy yourself that
the cables are not
squeezed or
damaged.
Fix the cables e.g.
with adhesive tape to
make the handling
easier.
9.
Fig. 78 - Tighten the screw of the
handle
Tighten the hexagon
socket head screw of
the handle of the
inside shield with the
3 mm hexagon
socket head key.
10.
Fig. 79 - Guide the cables
Guide the cables from
the outside shield
through the cut-out in
the outside fastening
plate as shown in the
figure.