Fitting
OMEGA ACTIVE IES Page 77 of 128
18
1 x crossbar
19
2 x lever arm
20
1 x inside shield
21
1 x countersunk screw M3 x 10 mm
22
2 x batteries, size AA, 3.6 V, lithium
23
2 x fastening screws for inside mounting M3 × 6 mm
24
2 x fastening screws for inside mounting, wooden or
sheet metal screw depending on door
25
1 x Inside plate with electronics module and battery
compartment
26
1 x spacer plate for inside
1.
Fig. 97 - Insert the spindle
Select the spindle
appropriate for the
follower (hub, see
pages 37 and 36).
Insert the spindle
into the follower of
the coupling unit.
The correct spindle must already be specified with the
order.
2.
Fig. 98 - Fasten the spindle
Fasten the spindle
with the hexagon
socket head screw.
Use the 2 mm
hexagon socket
head key supplied
for fastening the
spindle.