6 Assembly
Target group of this section:
l
CEStronics partners
l
Locking and security technology specialists with product training
l
Personnel with product training
6.1 Scope of delivery
The RFID furniture lock is available in two versions (with a
lever or with a square spindle for espagnolette locks). The
scope of delivery varies according to the version.
1
Housing
2
Nut SW24*
for upper fixing on the cabinet/compartment door
3
Directional washer*
to set the rotational direction of the knob for locking
4
Locking cam*
depending on the particular installation, elbowed or hook-shaped
locking cams can also be used
5
Bolt SW10
to secure the locking cam
6
Countersunk head screw
TX20
for lower fixing on the cabinet/compartment door
7
Sleeve, long
spacer for door thickness of 1-10 mm
8
Sleeve, short
spacer for door thickness of 11-22 mm
9
Battery cover
10
Screw
to secure the battery cover
11
Battery pack
assembled battery pack; 3 V; with 2x AAA Energizer Ultimate Lithium
batteries
12
Battery change tool
for attaching and removing the battery connector
* With lever version only.
Page
18
of
84
RFID furniture lock
6.1 Scope of delivery
Overview:
Use
of
master
media
Help
&
troubleshoot
ing
T
echnical
dat
a
Maintenance
&
disposal
O
perat
ion
A
dminist
rat
ion
Assembly
Basic
information
