jobs to a locking device via RF-Stick"
on page 79). The connection between the RF-Stick and locking
device is then automatically disconnected.
8.4.3 Initialising an RF-Stick for the OMEGA Client
Required:
l
RF-Stick
l
PC with OMEGA Client installed
Procedure:
Steps
1. Insert the RF-Stick into a free USB socket of a PC on which OMEGA Client is installed.
The RF-Stick driver is installed automatically.
2. Start OMEGA Client and log in.
The RF-Stick is automatically detected by OMEGA Client. The bottom bar of OMEGA Client now displays ‘RF-Stick ready’.
The RF-Stick is now initialised.
Troubleshooting:
Problem
Cause
Solution
OMEGA Client indicates ‘RF-
Stick not authorised’.
The RF-Stick belongs to a different system and cannot
be used for the administration of your OMEGA FLEX
system.
Use an RF-Stick that has the sys-
tem number of your OMEGA FLEX
system.
RFID furniture lock
Page
39
of
84
8.4 Administration using the RF-Stick
Overview:
Use
of
master
media
Help
&
troubleshoot
ing
T
echnical
dat
a
Maint
enance
&
disposal
O
perat
ion
Administration
Assembly
Basic
information
