1 About this manual
These installation and operating instructions, hereinafter referred to as "manual", will help you with the
installation and the intended, safe and advantageous use of the electronic hardware you have purchased.
Every person who assembles, administrates, maintains or disposes of electronic fittings must have read and
understood the complete content of these manual.
If you do not understand certain functions of the OMEGA FLEX system, please contact your CEStronics
partner for further information.
This manual must be treated as a part of the product and must be kept for the entire service life of the
product. The manual should also be given to any subsequent user or owner of the product.
The information and data in these documents are subject to change without prior notice. No part of this
document may be copied or distributed for any purpose without the express written consent of C.Ed.
Schulte GmbH Zylinderschlossfabrik.
©
2021
C.Ed. Schulte GmbH Zylinderschlossfabrik, Velbert, Germany
BRO2306 -2
Version:
VA1
Always use the most up-to-date version of this manual. You can obtain updated versions free of
charge from
.
Notes on trademark protection
MIFARE, MIFARE Classic, MIFARE Ultralight and MIFARE DESFire are registered trademarks of NXP B.V. and
are used under licence.
1.1 Manufacturer and service
C.Ed. Schulte GmbH
Zylinderschlossfabrik
Friedrichstr. 243
42551 Velbert, Germany
Tel: +49 (0) 2051-204-0
Fax: +49 (0) 2051-204-229
info@ces.eu
Page
4
of
84
RFID furniture lock
1.1 Manufacturer and service
Overview:
Use
of
master
media
Help
&
troubleshoot
ing
T
echnical
dat
a
Maint
enance
&
disposal
O
perat
ion
A
dminist
rat
ion
A
ssembly
Basic
information