9.5 Battery replacement
NOTICE
Potential damage from incorrect batteries
The use of incorrect batteries may result in irreparable damage to the locking device.
✓
Use only battery packs prepared by CES (assembled battery pack; 3 V; with 2x AAA
Energizer Ultimate Lithium batteries)
NOTICE
Damage caused by the use of objects as battery changing aids
The battery, battery module housing or electronics may be damaged if you use an
object (such as a screwdriver) to remove the battery from the battery compartment.
✓
Use only your hands to remove the battery; do not use any other objects.
The authorisations and other settings (opening durations, etc.) are retained in the memory of the
locking device after the battery has been removed.
The date and time are retained for about ten minutes after the battery is removed. If the battery is
removed for longer, the date and time must be set again. This might also affect authorisations with
time settings.
9.5.1 Battery replacement RFID Furniture Lock
Use the battery change tool supplied for inserting or removing the cable connector. Do not use any
other objects.
Use only original battery packs from CES (assembled battery pack; 3 V; with 2x AAA Energizer
Ultimate Lithium batteries).
9.5.1.1 Removing the battery pack
1. Remove the screw of the battery compartment cover.
2. Remove the battery compartment cover.
3. Carefully pull the strip to remove the battery pack.
RFID furniture lock
Page
47
of
84
9.5 Battery replacement
Overview:
Use
of
master
media
Help
&
troubleshooting
Technical
data
Maintenance
&
disposal
Operation
Administration
Assembly
Basic
information
