13.5.3 Deleting all locking media authorisations simultaneously
Only those locking medium authorisations are deleted that were added using the same Program-
Master that is being used to delete them.
These step-by-step instructions show you how to delete all locking device authorisations while
keeping the Program-Master stored in the locking device. Alternatively, you can also delete the
Program-Master from the locking device, and this will also delete all locking device authorisations
that were added using this Program-Master.
Procedure:
Steps
Signal
1. Hold the Program-Master in the reading field of the locking device for approx. 5 seconds.
The Program-Master is deleted.
2x
short
green
2. Remove the Program-Master from the reading field of the locking device.
The Program-Master and all locking medium authorisations that were added with this Program-Master are now
deleted from the locking device.
RFID furniture lock
Page
69
of
84
13.5 Locking media
Overview:
Use
of
master
media
Help
&
troubleshooting
T
echnical
dat
a
Maintenance
&
disposal
Operation
Administration
Assembly
Basic
information