Fitting the locking cylinder in a door lock
32
RF-Master-Set
Push the cylinder body and the fitting aid further into the
profile cylinder hole.
Pull the fitting aid out of the profile cylinder hole from the
outside.
Insert the cylinder body into the profile cylinder hole of the
door lock.
Rotate the inside knob to verify that the follower can move
free of friction.
If the movement of the follower is impeded by friction,
remove the cylinder body again from the profile cylinder
hole.
Verify the proper functioning of the door lock.
If the door lock does not operate properly, please contact
the lock manufacturer.
Repeat the steps described above to fit the cylinder body.