Fitting the locking cylinder in a door lock
RF-Master-Set
33
NOTICE
If a drilling machine or a cordless screwdriver
is used to fasten the locking cylinder, the
locking cylinder may be damaged.
Do not use a cordless screwdriver or drilling
machine for fitting the RF-Master-Set.
Only use the tool specified for this purpose.
Insert the fixing screw into the door lock and initially screw
it in only until it is flush with the striking plate.
Do not yet tighten the fixing screw at this point.
This will enable you to verify that the follower
moves without friction after the fitting of the locking
cylinder has been completed.