Operating the door lock
RF-Master-Set
41
The locking cylinder of the RF Master Set is equipped with a
reader which enables you to operate the door lock from the
outside. To operate the door lock from the outside, you need a
locking medium that is authorized for this RF-Master-Set.
Please refer to the enclosed Programming Instructions on how
to authorize locking media.
Mifare locking media
Move with your authorized locking system (1) into the
reading range of the locking cylinder. This range is about
20 mm.
The reader module in the outside knob identifies the locking
medium.
The locking cylinder sends a short signal to signal the enable
status.
During the opening time you can open the door. During this
opening time, the locking cylinder does not respond to any
other locking media.
To open the door lock, rotate the outside knob in the
corresponding direction (2).
Release the knob immediately after the door has been
opened. You do not have to turn the knob back into its
original position.