For your safety
RF-Master-Set
7
The RF-Master-Set contains highly sensitive electronic parts
that may be damaged or destroyed through static charges.
Do not disassemble the RF-Master-Set in rooms with built up
static charge.
The locking cylinder may not be used for outdoor
application.
Danger through environmental conditions
Do not use the RF-Master-Set in corrosive atmospheres
(chlorine, ammonia, lime water).
Only use the RF-Master-Set in rooms in which the humidity
does not exceed 95 %.
Do not use the RF-Master-Set in rooms with a high level of
dust formation.
Do not use the RF-Master-Set near sources of heat.
The outside knob may only be exposed to temperatures
between–25 °C and +70 °C.
The inside knob may only be exposed to temperatures
between 0 °C and +50 °C.
Danger of malfunctions
The reading units in the RF-Master-Set must not be covered
with any metallic material.