Transport notes
RF-Master-Set
45
Transport notes
Locking cylinders may interact if they are placed too close to
one another or too close to locking media. This will discharge
the battery.
To prevent interaction between cylinders during transport,
please observe the following notes:
Always keep locking
cylinders at least 5 cm
apart.
If this is not possible,
remove the battery of the
locking cylinder (please
refer to page 46).
Do not transport locking
cylinders together with ID
cards or locking media.
If this is not possible,
remove the battery of the
locking cylinder (please
refer to page 46).
Only transport locking
cylinders with the reader
fitted.
If this is not possible,
remove the battery of the
locking cylinder (please
refer to page 46).