Fitting the wall terminals
OMEGA Mifare wall terminals
41
The length of the cable between the control module
and the reader module must not exceed 20 metres.
Only the supplied cable may be used. Do not extend
the cable!
Only use J-Y(St)-Y 2
2
0.6 mm² cables for the
connection between the control unit and the
reader module.
The mounting holes of the wall terminal must always
be aligned horizontally, also when the wall terminal
is installed on in-wall switch boxes.
Fasten the control module and the reader module with two
2.5
20 mm universal screws each on their respective in-
wall switch box.
Ensure that the LEDs (1) are at the top when the reader
module is fastened.
