Operating the wall terminal
OMEGA Mifare wall terminals
45
DESFire EV-1 in standard mode
Locking media operating in the standard mode behave like any
other ISO 14443 transponders. For authorization, the UID of
the locking medium is used.
If you manage your systems with the CEStronics software, you
can use both DESFire EV-1 variants with the CEStronics
software.
Move your authorized locking medium (1) into the reading
range of the wall terminal.
This distance is about 50 mm.
The reader module (2) identifies the locking medium. The wall
terminal sends a short signal to signal the enable status.
During the opening time you can open the door. During this
opening time, the wall terminal does not respond to any other
locking media.
If you are using a locking medium that is not authorized to
enable this locking cylinder, the light ring of the locking
cylinder flashes red four times and you hear four successive
beeps. In this case, the outside knob is not coupled with the
follower. The outside knob rotates freely but the door lock
cannot be operated.