Programming via programming cable
OMEGA Mifare wall terminals
49
For the WT-M-II, the programming cable must be
plugged into the control board. The reader does
not have an interface.
Plug the programming cable (1) into the interface (2) on the
board of the wall terminal.
Start OMEGA Mifare Client and log in.
Perform the desired operation (create locking plan, manage
devices and media, etc.).
Connect the USB plug of the programming cable with your
free USB port.
3
Wall terminals WT-M-I, WT-M-II, housing CES Standard
4
Wall terminals WT-M-I, WT-M-II in various housing types
and for flush installation