22
Cetis AP
Security Mode:
There are 11 options, including
Disable, OPEN, SHARED, WEPAUTO,
WPA, WPA-PSK, WPA2, WPA2-PSK, WPAPSKWPA2PSK, WPA1WPA2,
and
802.1X
.
Wire Equivalence Protection (WEP)
WEP Key (1-4):
Input the key to encrypt wireless data. To allow encrypted
data transmission, the WEP Encryption Key values on all wireless stations
must be the same as the router. There are four keys for your selection. The
input format can either be HEX style or ASCII format, 10 and 26 HEX codes
or 5 and 13 ASCII codes are required for WEP64 and WEP128 respectively.
Access Policy
Policy:
There are three options, including Disable, Allow, and Reject. You
can choose Disable, Allow or Reject. Select Allow, only the clients whose
MAC address is listed can access the router. Select Reject, the clients whose
MAC address is listed are denied to access the router.
Add a station MAC:
If you want to add a station MAC, input the MAC
address of the wireless stations that are allowed or denied access to your
router in this address field.
After completing the settings above, click
Apply
to save the settings and
make the new configuration take effect. Click
Cancel
to close without
saving.
Summary of Contents for EXA100
