CHARTNAV 343
38
8.1 Waypoint Arrival Alarm
The waypoint Arrival Alarm is an audible and visual warning
that your vessel is within a specified radius of the Target
Waypoint.
To set or adjust the Waypoint Arrival Alarm, highlight the WPT
ALARM option on the Side Menu and press the
SELECT
key
to choose from the following settings: OFF, 0.10 NM, 0.50
NM, 1.00 NM or 5.00 NM
To clear the Waypoint Arrival Alarm, press the
SELECT
key.
This alarm will not affect the point at which the Chartnav will
turn on to a new Target.
8.2 Audible Alarm
When an alarm is initiated the Chartnav will display an alarm
message in a Pop-Up Window and an audible alarm will
sound.
The audible alarm feature may be switched off. Highlight
AUDIBLE ALARM on the Side Menu and use the
SELECT
key
to choose between ON and OFF.
8.3 Key Beep
Each time a key is pressed, the unit emits a beep sound to
confirm that the key press has been registered.
The KEY BEEP setting on the Alarms Menu turns the audible
response from a key press ON or OFF. Again use the
SELECT
key to switch between the two settings.
8.4 Reported Alarms
The Chartnav will also use the Pop-Up Window and audible
alarm features to display the following alarms:
Fix : Not Good
Fix : Not Received
Wrong Format
Autopilot Arrival Range
Chart Scale Changed
(If scale changes automatically the Chartnav will emit a single
beep but no alarm message will be shown.)
All manuals and user guides at all-guides.com
